Want to buy online?
Need a Submittal Package?
Use our Submittal Builder
HDA-T 30 M16 x 190/60: Item No.: 00331553
Technical Data
| Anchor length | 295 mm |
| Bit Diameter | 30 mm |
| Anchor Type | Mechanical anchor |
| Environmental conditions | Inside dry |
| Min. thickness of base material | 330 mm |
| Base Materials | Concrete (non-cracked) Concrete (cracked) |
| Working principle | Undercut/keying, cast-in headed stud like |
| Type of Fixing | Through-fastening |
| Material composition | Steel, galvanized min. 5µm, bolt: steel strength 8.8 |
| Material Coating/Plating/Finish | Galvanized min. 5 µm |
| Length identification mark | S |
| Approvals | ETA (Option 1), ICC (including seismic), DIBt (fatigue), DIBt (nuclear power plants), BZS (shock), IBMB (Fire) |
| Effective embedment depth | 190 mm |
| Thickness fastened range | 15 - 60 mm |
| Thickness fastened - min (shear load - without use of centering washer) | 20 mm |
| Thickness fastened - min (shear load - with use of centering washer) | 15 mm |
| Thickness fastened - min (tension load only) | 15 mm |
| Required tightening torque | 120 Nm |
| Washer Size | 45.5 mm |
| Wrench size | 24 mm |
| Accessories | Centering washer HDA-F-CW 5-M16 Removal tool TE-C-HDA-RT 30-M16 Grinding tool TE-C-HDA-GT 30 Dynamic set M16 |
| Required stop drill bit | TE-Y-HDA-B 30x250 |
| Setting tool | TE-Y-HDA-ST 30 M16 |
| Required Accessories | Hammer drill TE 70, TE 75, TE 76 or TE 80 in combination with stop drill bit TE-Y-HDA-B 30*250 and setting tool TE-Y-HDA-ST 30 M16 |
| Additional Product Info | It is required to apply the stop drill bit and set the anchor with the specified drilling tool and the setting tool |
